Which Engine Control Unit (ECU) and MCU processor are installed on Genesis G90 (5000 GDI G8BE 413)?

Vehicle Genesis G90 (5000 GDI G8BE 413) is equipped with the BOSCH MED17.9.30 ECU powered by the TC1793S. Connection Mode: Platform (Bench No-Open) + Boot.

Where can I get the Bench/Boot pinout diagram for BOSCH MED17.9.30 and stock firmware files?

This page provides the official color ECU connector pinout (2 Bench/Boot diagrams) and 0 linked engineering files: stock firmware (.BIN/.HEX/.FRF), WinOLS map packs (.KP/.OLS/.A2L), coding parameterization, and dealer manuals.

ECUFLASH.PRO FIRMWARE, DAMOS & WIKI

EN • USD / USDT

ECUFLASH.PRO / Vehicle & ECU Catalog / Genesis / G90 (MED17.9.30)

VEHICLE & ECU TECHNICAL PASSPORT • CAR ID #5617

Genesis G90 (5000 GDI G8BE 413) — ECU BOSCH MED17.9.30 (TC1793S)

PODDERZHKA PROTOKOLA: CHtenie/Zapis Bench/Boot + Otklyuchenie oshibok DTC/IMMO & stoki v baze. ECU Connection Mode: Platform (Bench No-Open) + Boot.

1. FACTORY ECU & MICROCONTROLLER INSTALLED ON THIS VEHICLEBENCH / BOOT / OBD VERIFIED

Make & Model (Chassis)	Genesis — G90
Engine & Power Spec	5000 GDI G8BE 413
Engine Control Unit (ECU)	BOSCH MED17.9.30
Internal Microcontroller (MCU)	TC1793S
Read / Write Connection Mode	Platform (Bench No-Open) + Boot
Supported Programmer Functions	Built-in Automatic DTC Fault Code Off Calculator (DTC OFF) • Full PFLASH + DFLASH Backup Read/Write (1:1 ECU Cloning) + Auto Checksum Correction
Available Files in 800 TB Vault	Exact ECU Maps: 0 (.A2L/.KP/.OLS) \| Family Maps: 0 \| ROMs: 0

2. OFFICIAL BENCH / BOOT ECU CONNECTOR PINOUT DIAGRAM2 DIAGRAMS

OFFICIAL BENCH / BOOT ECU PINOUT DIAGRAM: BOOT_BOSCH MED17.9.30.png

OFFICIAL BENCH / BOOT ECU PINOUT DIAGRAM: BOSCH MED17.9.30.png